I am profesional photographer and artist. I thought the changes might be meant to tell me something, but I have the tech sheet and there’s nothing in there that discusses color. Develop to the contrast index for your application; see “Exposure” and the characteristic curves. Vintage postcard 2 by Tanzer Olympus Trip 35 f? Because of this extended red sensitivity, red areas and flesh tones may appear lighter than they would with conventional black-and-white films.

It is a variable-contrast panchromatic film with extended red sensitivity; because of its extended red sensitivity, it yields prints with a gray-tone rendering slightly different from that produced by other panchromatic films. The film plane and the plane of the copyboard must be parallel to provide sharp focus over the whole image area. Use running water for 30 seconds if no stop bath is available. They are also useful for lunar and planetary photography. Yeah and that’s fine if you doing document copying. When you mix it it is clear.

Observe the precautionary information on the developer packaging. Mostly more on reproducibility! Street portrait by BeWePa. You can reuse the developer if you increase the development time of the second process by 1 minute. If contrast is too low, increase the development time; if too high, decrease the time.

I was concerned that this might mean it no longer would work but I tried it anyway. So does all this imply that HC is a viable alternate developrr for Tech Pan? Multiply the normal exposure by the filter factor indicated below.

Kodak Technical Pan developed in Kodak Technidol. I find though that the technidol packets I have results in an amount which is too little volume for two single reel loads so where normally you should be able to get two “doses” of technidol that can each be used twice, what you really get is 1 slightly oversized dose that can be used twice. Usually in the past, I’ve run into tints put there by Kodak to indicate something to the user — Indicator Stop Bath for instance that signals exhaustion by color change which matters a lot more in printing than developing since typically I don’t reuse it.


You’re not going to get both speed and heavy compensation low gamma with Techpan without using Technidol. The dyes are pretty strong, so it doesn’t take much to make it look pretty pink. But gamma is the favorite for power-law behavior, and so is the slope of a log-log plot. This time the camera was the huge G, which gives just 8 6×9 negatives.

Move the sheets to the fixer one at a time.

Melbourne Cemetary June Kpdak, several very small bottles of Technidol developer. I don’t know how to do that but I bet someone does.

Kodak Technidol Developer (Liquid) for Black & White

The speed of this film depends on the application, the type and degree of development, and the level of contrast required. How many bottles is “several”? Process the film to a gamma of 2. Use the special agitation procedure described below for best processing uniformity in a tray. It’s really a low energy developer but it works well with Tech Pan. This 19th century structure of Victorian Renaissance Revival architectural style is nestled among towering modern skyscrapers in the downtown business district of Sydney, Australia.


Dry the film in a dust-free place. After 1 minute, take the entire stack of film and turn it degrees. So presumably if you couldn’t use technidol or reproduce it, you’d want to lower the contrast in a way that say D76 would not. Protect processed film from strong light, and store it in a cool dry place.

Kodak TECHNIDOL Liquid Developer 5 Packets

You can expose this film with daylight or tungsten light. Yeah and that’s fine if you doing document copying.

X-Ray Film – filmphotographyproject. Shot with the Yashicamat and a yellow filter tecgnidol expired Kodak Tech Pan film. Yes, you use the Technidol at the stated dilution.

KODAK PROFESSIONAL Technical Pan Film: Tech Pub P

Hopefully it is somewhat linear Do not reuse this solution for a second batch even if your first batch consisted of fewer than twelve sheets. However, in holographic interferometry, processing the film to a contrast index of 1.

Just an added note for something I just found out here in which may be of use deveooper someone or not, not sure. When you mix it it is clear.

Sizes and CAT numbers may differ from country to country. I found a few slices of X-Ray film and shot this portrait of Mat Marrash. If necessary, adjust the exposure index or development as described above.

Now I need take image with small grain.